The British 'Dark' class

Post-war development of Coastal Forces craft covering the Proud, Bold, Gay, Dark or Brave Class boats, as well as experimental craft
Pioneer
Moderator
Posts: 294
Joined: Sun Oct 19, 2008 12:48 pm

The British 'Dark' class

Postby Pioneer » Wed Mar 16, 2011 9:11 pm

The Royal Navy’s ‘Dark’ class had quite a long gestation period having been ordered in the mid to late 1940s. The rather severe box like design had had its origins on the drawing boards of the Royal Naval Constructors at Bath (UK) however, Messrs Saunders Roe were awarded the detail design contract for what was then known as the Admiralty Type ‘A’ Fast Patrol Boat. The specification required that it should be diesel powered; the power units chosen were to be a marinised version of the powerful Napier ‘Deltic’ engine. Using a combination of alloy frames and decking, with traditional wood for hull sheathing, we are indebted to David Mills for this image of the final stages of construction of P1101 HMS Dark Adventurer – we hope to show you more from his collection of archive material from Messrs Saunders Roe. (click image for full view).
dark-p1101-1.jpg
dark-p1101-1.jpg (100.59 KiB) Viewed 9969 times

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

Re: The British 'Dark' class

Postby Dave Mills » Thu Mar 17, 2011 2:42 pm

Ted, thanks for dropping in the photo of P1101 Dark Adventurer outside the main hangar with the old Fryars house shown in the background. The low building next to it was the drawing office where my father Victor Mills worked from late 1945 to 1974 and where I spent a few years too. This photo is of the first of the Dark Class to be built at Saunders-Roe (Anglesey) Ltd.
I will add photos of the Dark's starting with this general arrangement drawing of the Type A FPB (Fast Patrol Boat) They were designed to be like the Black & Decker drill by being able to add various attachments, like a pair of 20mm Oerlikons on the aft deck, torpedo tubes making them MTB’s, or a larger Cannon as seen on the pair for Finland, Vasama 1 and 2. Saunders-Roe (SARO) also built a series of five riveted aluminium hulled FPB's for the Burmese Government (T201-T205) and were fitted with a bespoke alternative electric drive in addition to the twin Deltics. These were known as Slow Speed Drives. My father said they were for enabling the Burmese Navy to creep silently along the many creeks to catch smugglers and bandits. It all sounded very exciting to hear such things when I was only a young lad at the time. All the RN Dark Class were of timber diagonal planking over an aluminium frame structure with the single exception of P1120 Dark Scout. This was a unique model with an all-welded aluminium hull, simplified bridge design (no spray deflectors) and the used transom exhausts. Photos of Dark Scout become easy to spot even at a distance with that 'box' of a bridge. She was also the last to be built at the Beaumaris works and was launched 20 March 1958.
The last 'foreign' FPB that SARO built to the Dark Class design was shipped to Japan 29 July 1957. I found only a couple of very hazy photos on the internet, but have just found four more while scanning through eight to ten thousand surviving Saunders-Roe negatives. Many are superb, but equally, many are in very poor condition. I will choose a small selection of the better ones for you all to see. (click on images for larger views)
dark-ga-drawing.jpg

Julie
Seaman
Posts: 12
Joined: Wed Oct 22, 2008 4:08 pm

Re: The British 'Dark' class

Postby Julie » Thu Mar 17, 2011 5:20 pm

The Japenese boat was in yokohama in 1957 Scout was accepted into the RN in 1958 would'nt that make Scout as the last to be built??
nice to see this change to the forum best wishes
Julie

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

Re: The British 'Dark' class

Postby Dave Mills » Thu Mar 17, 2011 10:17 pm

Yes Julie, the FPB for Japan was shipped out 29 July 1957 and P1120 Dark Scout was launched 20 March 1958.
Scout was therfefore the last Dark built at SARO for the RN as the rest of the order was cancelled.
There is also some info on the BMPT forum.
As this subject has come up so soon in the new Dark Class section I will drop these photos in of her.
505-3a.jpg
Dark Scout with all welded aluminium alloy platework.
570-4 (5).jpg
P1120 clearly showing transom exhausts
570-4 (5).jpg (46.96 KiB) Viewed 9934 times
555-3.jpg
P1120 outside workshops
555-3.jpg (71.43 KiB) Viewed 9934 times
565-14.jpg
P1120 on the Menai Strait
565-14.jpg (46.66 KiB) Viewed 9934 times
Attachments
555-2.jpg
P1120 prior to launching
555-2.jpg (79.05 KiB) Viewed 9934 times

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

Re: SARO FPB for Japan

Postby Dave Mills » Fri Mar 18, 2011 9:19 am

Having mentioned the SARO built FPB for Japan I found this page from the company magazine of 1957. The four negatives I have found so far are in particularly poor condition and very badly wrinkled. I will try to repair one or two some time when I'm not scanning the rest of the comapny magazines or surviving negatives.
Attachments
SARO Progress 1957 No4.jpg
SARO Progress 1957 No4.jpg (112.89 KiB) Viewed 9921 times

justaveteran
Seaman
Posts: 6
Joined: Tue Oct 21, 2008 7:55 pm

Re: The British 'Dark' class

Postby justaveteran » Sat Mar 19, 2011 8:53 pm

Great pictures but, to me, 'tin' MTBs do not appear to be so 'workmanlike'.
I'm sure the designers have got it right, but try convincing us riders of the wartime wooden variety !

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

Re: The British 'Dark' class

Postby Dave Mills » Sat Mar 19, 2011 10:07 pm

I think Dark Scout's welded hull was an experiment for the navy as the company had built the 72ft all welded aluminium motor/sailer 'Morag Mhor' for the British Aluminium Co. Dark Scout may also have been an experiment to further reduce cost, time of construction, weight and complexity and possibly increase hull stiffness over the aluminium/timber composite that the RN originally specified. She was more of a Ford "Consul" than a "Zodiac".
The Dark Class may not have been very elegant (pointed shoe box!), but they were designed to be a versatile tool with interchangeable bits.
The earlier and more eleganet experimental riveted aluminium MTB 539 (later P1602) launched 1948 is today under around 43m of the Irish Sea off Anglesey and said to be 'polished shiny' by the action of tide and sand although she went down almost 60 years ago. What would a wooden hull be like after 60 years? I'm hoping to have a diver down on her this summer to check her out with a view to possible rescue. [click image for full view]
a 539gx714.jpg
All riveted aluminium experimantal MTB 539 (later P1602)
a 539gx714.jpg (62.2 KiB) Viewed 9891 times

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

Re: The British 'Dark' class

Postby Dave Mills » Sun Mar 27, 2011 6:46 pm

After the loss of the experimental all aluminium MTB P1602 in early 1952, Saunders-Roe won the contract to detail design and build the next generation of FPB known as the Dark Class. They were somewhat ‘chunkier’ and box-like around the rear quarters than the more elegant P1602. The Darks were of a composite hull construction using riveted aluminium alloy frames and stringers over-clad with laminated timber strip planking. There were bolted to the metal frames and the decks were plated with riveted aluminium sheeting. They were powered by two Napier Deltic 18 cylinder 2-stroke supercharged diesel engines of 2,500 BHP each. Saunders Roe built Dark Adventurer, Aggressor, Antagonist, Biter and Avenger. During the building of these five vessels SARO shopped out components to other shipyards for the building of the rest of the series for the Royal Navy. The last that SARO build for the Navy was a variant on the design in the form of P1120 Dark Scout. She was the only all-welded aluminium Dark and was somewhat simplified by the looks of her. No doubt it was a cost cutting exercise to appease the Government as the remainder of the order for the Darks was about to be cancelled.
SARO also won a contract to supply two very similar vessels to Finland, Vasama 1 and Vasama 2. There appear to have been of conventional composite hull construction.
The Burmese Government also ordered a set of five all riveted aluminium clad FPB’s complete with a bespoke auxiliary battery-electric ‘slow-speed drive’. My father said it was for silently creeping up the many river creeks to search out pirates, smugglers, bandits and gun-runners – all exciting stuff for a youngster to hear! The aluminium hulls were specified to withstand marine worm attack that would have been a problem in the warmer tropical waters.
Following this series was one for Japan, service number PT9. There is a strange rumour that she was supplied with only one of the usual two Napier Deltic engines. It seems a strange tale and I can’t imagine why anyone would want to spread it. If the Japanese wanted a Deltic engine for some other purpose I would have though they could have obtained one by a less devious and expensive route. The company magazine article does mention two engines, so the rumour may be just that.
On the subject of tales and rumours there is a 1951 Saunders-Roe advertisement that illustrates P1602 and proudly proclaims she is the World’s First Aluminium Alloy MTB. This has been found to be untrue/incorrect. The Americans has an alloy MTB No PT-8 in 1934 and is today restored and for sale for around $1.4M
Long before PT-9 was a pair of aluminium hulled steam torpedo boats built by the Scottish Yarrow Co., one for France, Le Fourde in 1894 and a larger one for Russia, Sokol (Falcon) in 1895.
P1602 may be more accurately described as either Britain’s or the Royal Navy’s first aluminium MTB, unless that is proved incorrect? [click to enlarge]
Attachments
P1101 Dark Adventurer x 995.jpg
Rare colour photo of P1101 Dark Adventurer (possibly after running into Beaumaris Pier by her scruffy condition!)
P1101 Dark Adventurer x 997.jpg
Launching of P1101 Dark Adventurer

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

Headless Burmese Dark!

Postby Dave Mills » Sun Mar 27, 2011 10:44 pm

I have just asked a friend about the rumour of the Japanese ‘Dark’ class being fitted with only one engine, but he had neither heard about it or could suggest any reason for it.
He did, however, tell me a story about the Burmese T201-T205 series. One of them was moored at Menai Bridge pier during some particularly rough weather. When they came to start her up the next morning they spun over one of the Deltic’s engines that promptly wrecked a piston or con-rod (NOT cylinder head as I wrote earlier as there are none on the Deltics) due to seawater having entered into one of the side exhaust ports and getting past the protective flap. Pairs of pistons must have come together in one or more of the cylinders (probably an inclined bank) and met seawater that caused the damage. It had to be taken back along the Menai Strait to Saunders-Roe for an engine replacement!
After this incident all Deltic engines had to be taken through the additional start procedure of manually turning the engines over by one revolution to check that no water had entered any of the cylinders. It had also been said that the early Deltics had problems of cooling water leaking into cylinders, so the start up procedure could also detect this earlier problem. Napier's made changes to mak them into reliable and widely used marine and locomotive power sources.
Could this seawater ingress through the side exhausts be why P1120 Dark Scout was fitted with higher transom exhausts giving greater protection against sea water ingress?
[click to enlarge]
Attachments
Deltic-04.jpg
Section through Napier Deltic 18 cylinder supercharges two-stroke Diesel engine of 2,500 bhp
Deltic-04.jpg (59.55 KiB) Viewed 9832 times
Burma T201 & P1105 Dark Avenger rn-vets.jpg
Burma T201 and P1105 Dark Avenger at Menai Bridge Pier
Dark Scout Menai Bridge x 1000.jpg
P1120 Dark Scout with high level transom exhausts

Pioneer
Moderator
Posts: 294
Joined: Sun Oct 19, 2008 12:48 pm

Re: The British 'Dark' class

Postby Pioneer » Mon Mar 28, 2011 8:55 pm

A very evocative view of the Burmese T201 for me - as I was onboard when this image was taken. At that time I was a Stoker 1c in the 7th Ferry Crew from HMS Hornet.
We had just arrived to witness the launch - shortly before the shot was taken - those Naval personnel present - I was one - boarded for a very short trial (with the Saro crew).
After further short sea trials that lasted a couple of days, she was 'signed for' and the 7th Ferry Crew finally sailed her down to Weymouth for shipment as Deck cargo for Rangoon. A very cushy number for the Stokers (2 plus 1 Leading Hand) as we were not allowed in the Engine Room control booth for the whole journey South - overnight stop at Falmouth - Happy Days

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

Saunders-Roe first aluminium 'Dark' for Burma T201

Postby Dave Mills » Fri Apr 01, 2011 6:27 pm

Another evocative couple of photos of the Burmese 'Dark' T201. One on the inclined slipway at Saunders-Roe Beaumaris. The slip way built in 1953 on the funicular system where the boat starting on the level at the top of the inclined rail tracks, but ending up at a small angle to help them roll across the coast road to Penmon. The other photo was taken by my father Victor Mills of me on the bridge of T201 before having a wonderful trip along the Menai Strait to Port Dinorwic.
Attachments
Burma T201 & P1105 Dark Avenger x 1000.jpg
T201 and P1105 Dark Avenger
First Burma MTB + David Mills x 1000.jpg
Dave Mills at the helm of Burmese FPB T201

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

More photos of Burma T201

Postby Dave Mills » Fri Apr 01, 2011 7:09 pm

Some more photos of Burma T201 at Saunders-Roe. 29th December 1955. What! - No Christmas holidays?
Attachments
253-1-T201 date 29-12-55 x1000.jpg
253-2-T201 x1000.jpg
253-3-T201 x1000.jpg
253-6-T201 x1000.jpg
253-8-T201 x1000.jpg

Pioneer
Moderator
Posts: 294
Joined: Sun Oct 19, 2008 12:48 pm

Re: The British 'Dark' class

Postby Pioneer » Fri Apr 01, 2011 7:31 pm

These photo's certainly raise a few questions for me Dave -
Can you remember any RN crew present on that trip down the Menai Strait to Port Dinorwic? - if so, then I was one of them. If not, this craft had 2 launchings - maybe this craft was the one that needed the engine change - and it was the second launch that I witnessed?? Super clear images Dave - thanks for posting them.

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

Re: The Burmese 'Dark' class

Postby Dave Mills » Sat Apr 02, 2011 10:24 am

I can't be 100% sure it was T201 that I got my ride on as a kid to Port Dinorwic. I remember it being towed stern first into the outer dock. I have some other photos of T20? at the port but they are from the damaged company negatives.
This article is from SARO Progress magazine for Autumn 1954.
I've completed the DVD with hyperlinked index for the thirty-five magazines that I managed to find so far. These will be available during my talks on MTB 539 (P1602). - More articles will follow -
Attachments
First Burma MTB + David Mills 2 x 1000.jpg
1954 Boys will be boys. Happy me!
Burma FPB article Autumn 1954.jpg
SARO Progress magazine Autumn 1954

Dave Mills
Chief Petty Officer
Posts: 53
Joined: Mon Mar 14, 2011 2:35 pm

P1102 Dark Aggressor - Commissioning

Postby Dave Mills » Sat Apr 02, 2011 2:49 pm

Another couple of SARO Progress articles on the Dark Class.
Note that Dark Aggressor also went to Port Dinorwic dock as did the Burmese T201, but this time to take on stores for her journey south presumably to HMS Hornet.
Attachments
Dark Aggressor commissioning.jpg
Dark Aggressor - commissioning (page 2 of 2)
Dark Aggressor commissioning 2.jpg
Dark Aggressor - commissioning (page 2 of 2)
P1104 Dark Biter Launch 3 June 55.jpg
P1104 Dark Biter launched 3 June 1955 (Note the photo is of Dark Aggressor)


Return to “Fast Patrol Boats”

Who is online

Users browsing this forum: No registered users and 1 guest

cron